Dopyt

Máte otázku? Zanechajte nám odkaz.

LED Sensor Light SID

SID, a ceiling LED light with an integrated light source, is suitable for common areas in blocks of flats, schools, hospitals, supermarkets and hotels.

SKU: d6615681f009-1 Categories: ,

It saves up to 90 % of the energy costs and its operation time is more than 50,000 hours. LEDs are integrated in the light body, so there is no need for the bulb.

There are few types available:

  • a basic ceiling light model
  • a model with a movement sensor
  • with an emergency module
  • with an emergency module and movement sensor

The installation is very easy and there is no need to replace the light sources during the operation time. The fixture guarantees the light chromaticity within the Kelvin scale, does not emit UV, does not attract insect and its operation is environmentally friendly.

The SID turns on immediately for 100 % or for the pre-set value and is resistant to the voltage fluctuation.

It switches on immediately, does not flicker, and there is no radio frequency disturbance (no stroboscopic effect).

Operation time 50,000 hrs.5 years warrantyCE certificationRoHS certification

LED LIGHT SID PARAMETERS

MODEL Sensor LED Light
SID 16 W
Sensor LED Light
SID 22 W
Input Voltage AC: 230 V/50 Hz
Input 16 W 22 W
Size Ø 300 mm, height 80 mm Ø 360 mm, height 80 mm
Light Flux (NW)* neutrálna biela (NB) 1,360 lm 1,870 lm
Beaming Angle 120°
LED Type SMD 2835
Colour Temperature 2,700 K ~ 6,500 K
Colour Rendering Index > 80 CRI (Ra)
Operation Temperature -20 °C ~ 40 °C
Operation Time 50,000 hours
Enclosure Rating IP 65
Microwave Sensor Parameters
Mounting Height 3 – 6 m
Sensro Range max. 8 m
Detection
150°
Sensor Sensitivity Settings
10 %, 50 %, 75 %, 100 %
Auto turn off timing
10 s/90 s/3 min/10 min
Emergency Module Parameters
Battery
NI-MH/4,8 V/2400 mA/h
Input
3.3 W
Light Flux
300 lm
Standy by Mode > 3 hours
Warranty 5 years

*  Light flux parameter shows the REAL light flux regarding the light intensity loss (not the LED chip light flux intensity, which does not reflect the real light intensity). Light flux intensity depends on the temperature employed (K), higher the temperature, higher the light flux. [3,000 K = warm white (WW), 4,000 K = neutral white (NW), 5,000 K = day light white (DW), 6,000 K = cold white (CB)]

We will develop a tailor-made solution for you

We price each project according to the needs of your space. Let our specialists prepare a price calculation for you.

Tomáš Krúžek

commercial and technical representative
(+421) 910 270 599
(+421) 32 286 14 84
led@freyaled.com